European Nuclear Society
e-news Issue 6 Autumn 2004
http://www.euronuclear.org/library/public/enews/ebulletinautumn2004/nuclear-reactors.htm

The Nuclear Reactors from a « Natural History » Perspective

Bertrand Barré

AREVA, France
President, European Nuclear Society
Bertrand.barre@areva.com

Abstract. The evolution of nuclear reactors since the 1942 Fermi experiment can be described along the lines of natural history, with an initial flourish of uninhibited creativity followed by a severe selection process leading to a handful of surviving species, with light water reactors occupying most of the biotope today. The criteria which drove this selection have evolved with time and might not all be relevant in the future. The recent interesting development of Generation IV and INPRO comes from a desire to rationalize and formalize the selection process for the future nuclear systems. Will these attempts be successful? Will “natural” selection still prevail? In any case, in the context of a growing demand for energy for the developing world and of the need to reduce GHG emission, the nuclear reactor “species” is here to stay.

1. Introduction

As we are celebrating, here in Obninsk, the “Jubilee” of Nuclear Power, many presentations will depict the history of nuclear development, while the bulk of the papers will be devoted to technical status and perspectives of nuclear systems, reactors and fuel cycles. Having not been myself a main actor of this development but, rather, a long time privileged witness, let me try to address the topic under a slightly different angle, and to sketch the natural history of the phylum “Nuclear Reactor”. This will lead me to evoke vital ebullience, evolutions and mutations, on a background of rigorous selection.

There cannot be natural history without some kind of taxonomy, without classifying the species according to more or less arbitrary criteria. Nuclear reactors are usually classified according to the main components of their core: fissile/fertile couple, physical-chemical nature of their fuel, nature of their moderator (or lack of it), nature and thermal-hydraulic condition of the cooling fluid. As the taxonomy is very much diversified, we shall call “species” only those classes comprising a significant number of successive specimens.

Even though there were a dozen of “natural” nuclear reactors operating near what is now Oklo, Gabon, almost two billion years ago, we shall start our natural history only from December 2, 1942, with the CP1 Pile in Chicago, where started the first man-made sustained fission chain reaction.

2. The ebullient Beginnings

After the end of the Manhattan Project, and in the “Atoms for Peace” atmosphere, started – essentially in the United States – a period of unbridled creativity, of vital ebullience, which appears hardly credible in retrospect. All the possible reactor types, and again some more, were dreamed, designed, and built, and most of them have actually been operated! All the possible combinations of fissile and fertile materials, of moderators and of cooling fluids

have been tried to build facilities, rather small indeed, and, let’s admit it, with a relative respect of safety and environmental impacts. But all these machines have worked, be it for a very limited time, and without any major accident if one excludes SL1, which might have been a bizarre suicide. Uranium, plutonium and thorium as metals, oxides, carbides or more exotic compounds, air and other gases, light water, heavy water, graphite and beryllium, rods, pins, spheres, particles, suspensions and fluidized beds, liquid metals and molten salts, everything has been tried at least once between 1950 and 1965 (Table 1). More than 50 different reactors have been built on the single “National Reactor Testing Station” near Idaho Falls, now INEEL, and then many more in Oak-Ridge, Hanford, Los Alamos, not to mention the Kurchatov Institute, IPPE and others.

Table 1. A few of the many possible combinations (Names in bold italic refer to “species”)

2.1. Prehistory [1-10]

At the very beginning, though, there were not so many possible choices. The only available fissile material was natural uranium, with its given 0.7% ²³⁵U. To sustain a chain reaction with natural uranium, one had to thermalize as quickly as possible the fast fission neutrons to avoid their capture in the resonances of ²³⁸U: the reactor could only be heterogeneous and moderated with light elements. Hydrogen being too absorbent, the choice of moderator was between heavy water, Graphite or, possibly Beryllium. At the time, the world stockpile of heavy water (painfully produced by electrolysis in Norway) was small, while pure graphite was industrially produced in the USA in quantities for electric furnace electrodes.
Consequently, CP1 had to be what it was: a regular and roughly spherical array of uranium pebbles (metal and oxide) within a pile of graphite bricks. Hence the name “atomic pile” which used to designate early nuclear reactors, while electrochemical piles retain the name of the original Volta pile of wafers. For the same reasons, a similar design was adopted in 1946 for the first Soviet reactor, still visible today in the Kurchatov Institute. The first British pile, GLEEP (1947) was also an array natural uranium/graphite (with some heavy water as well), while the Canadian and French chose heavy water D₂O to moderate their first reactors ZEEP (1945) and ZOÉ (1948).

For their first power reactors, while they were developing the technologies for isotopic enrichment, the American continued with the species natural uranium – graphite, with the air cooled Oak Ridge 1 pile (1943), then with the big plutonium production reactors of Hanford, directly cooled by water from the Columbia River. But to leave no stone unturned, they also started in 1944 a D₂O moderated pile at Argonne.

Unable to enrich uranium and unwilling to depend entirely from the United States for their fuel supply, the British and the French based the first phase of their nuclear development on “Magnox” and “UNGG” reactors of similar technology, using rods of metallic natural uranium clad in light alloy, disposed in array within a graphite pile and cooled by gas under pressure (air first, then CO₂). On the other hand, the Canadian – today the largest uranium producers in the world) stuck with the combination natural uranium - D₂O, developing the species “CANDU”.

2.2 Uranium Enrichment, the Deus ex Machina.

As soon as the technology for the isotopic enrichment of uranium was developed in the framework of the Manhattan Project, access to enriched uranium, from 1% to 93% freed reactor designers from one of the main constraint which inhibited them, neutron scarcity, and liberated their unbridled creativity. The drivers of this ultra fast initial evolution were the search for more compactness, higher thermal efficiency and better use of the fissile materials.

Low enriched uranium (LEU) around 3% ²³⁵U allowed notably to use as moderator ordinary water H₂O, the simplest of them all, despite its drawbacks already well known in conventional thermal plants: low boiling temperature under atmospheric pressure and corrosiveness with ordinary steels. In order to get a decent thermal efficiency, one had to use high pressures, typically 7 to 15 MPa.

In order to illustrate this initial creativity, here is a non exhaustive list of reactors built in the USA before 1955:

• Natural uranium – graphite plutonium production reactors (Hanford, 1944)

• Homogeneous solution in ordinary water of enriched uranium salts (Los Alamos, 1944)

• Clementine, Unmoderated sphere of metallic plutonium (Los Alamos, 1945)

• EBR 1, Liquid Metal Fast neutrons reactor (Idaho, 1951)

• MTR, pool type water reactor with plates of highly enriched uranium alloy (Idaho, 1952)

• STR, land based prototype of the Nautilus, first PWR (Idaho, 1953)

• BORAX 1, first BWR (Idaho, 1953)

At the same time, the Russian developed a reactor using LEU as fuel, graphite moderated and cooled with boiling ordinary water circulating in pressure tubes. This Obninsk prototype was then the first true power reactor to operate – hence our conference today! – it was also a dual purpose plutonium production reactor, forerunner of the RBMK species.

would-be species: Dragon, the first HTR, built in Great Britain in the framework of an OECD Project, and the MSRE, molten Salt Reactor Experiment in the United States.

At the end of the 60s, the most advanced western state for the civilian use of nuclear power was Great Britain, the only one to have developed a true species. Several of those early MAGNOX are still in operation. Even more than the difficult development of the AGR species, it is the discovery and exploitation of the North Sea oil fields which have stymied UK’s nuclear development in the 70s and led to the loss of their leadership. As for the United States, in the 60s, their nuclear supremacy was mostly in Defense applications, including a monopoly on naval propulsion and uranium enrichment.

3. The Drivers of Selection.

From all the possible designs and the many promising prototypes, we know today that only a handful made it to industrial series, to become what we call here a species. This was not the result of any deliberate process, it was just “natural”, or spontaneous selection. The present operating reactors were, indeed, the fittest to survive; were they the fittest to generate safely and sustainably competitive electric power? This is an open issue…

The drivers of this selection have been various, some positive and some negative. Let’s start with the negative drivers which led to elimination:

Some branches aborted because of technological difficulties (like the lack of compatibility between sodium and graphite in the Hallam reactor), because the project was really overambitious (like the “air breathing” reactor for airplane propulsion), for being too cumbersome (like the natural uranium fueled reactor of the Q 244 submarine), or even due to the choice of one key individual (like the sodium cooled Seawolf, when Admiral Rickhover selected the PWR for all the Navy).

Safety considerations played a more and more significant part in the elimination process. One would not dare, nowadays, submit to any regulatory authority the design of LAMPRE, with its liquid plutonium fuel/coolant; The Windscale fire (1957) eliminated for ever air cooling for graphite reactors, and the Babcock & Wilcox subspecies did not survive the Three Mile Island 2 accident, and nobody would order a new RBMK after Chernobyl. One example illustrate both the safety concern and the energetic methods in use during the pioneer era: to complete a series of reactivity excursion tests in BORAX 1, AEC provoked the deliberate destruction of the reactor in a spectacular vapor explosion after core meltdown (1954). This voluntary accident remains to date the basis for dimensioning the containment of pool type reactors. When one witness the precautions taken to carry out severe accident tests in the PHEBUS-PF reactor, BORAX seems a dream.

We have seen that the mastery of enrichment had made useless the “fine tuning” of the neutron balance required by natural uranium fueled reactors. Similarly, the discovery that uranium was relatively abundant, even though if less rich ores than the initial deposits of Bohemia and Katanga, if enough efforts were devoted to exploration, reduced the competitive advantage for a species to be uranium thrifty. Fast Neutron Breeders have evidently suffered from this evolution which consistently makes them “necessary… but later”. So have the Molten Salt reactors.

In some occurrences, selection may have been a matter of bad luck, bad timing. Such is notably the case for the High Temperature Reactors HTRs, which made a commercial debut in the USA at the beginning of the 70s, just before the rash of cancellations of nuclear plant orders triggered by the first oil crisis. It is, by the way, a very intriguing fact that the same initiator event, the 74 oil shock, launched the French programme while it nearly killed the American programme…

Nuclear power plant with pressurized water reactor

This rather long list should not lead to believe that selection was influenced only by negative factors leading to elimination of such and such competitors: positive factors have also played a key part. To illustrate the point, it is obvious that the emergence of the PWR species was considerably helped by the fact that these reactors had previously be chosen to power the nuclear Navy, because of their compactness, a quality not so essential for land based power plants. They could therefore benefit in the United States from a strong industrial development which allowed Westinghouse to outrun General Electric, its giant competitor. Similarly, MAGNOX, UNGG and RBMK evolved directly from reactors designed and developed to produce plutonium for weapons.

4. Today (and To-morrow)

The results of this selection process can be seen on table 2 [11]

4.1 Gas Cooled Reactors

The gas cooled graphite moderated species, once flourishing, was successively abandoned by France, Italy, Spain and Japan. Only survive the British Magnox and AGR, roughly 4% of the installed capacity today, but the most recent reactor operating in the UK is a PWR.

Magnox and the French UNGG used natural uranium as a fuel, but as graphite is a mediocre moderator, the neutron balance was very tight, and they could not afford neutron capture in oxygen. Therefore the fuel was metallic uranium, the melting temperature of which is unfortunately low. They also could afford as few as possible captures in the fission products, a constraint which made on-line refueling compulsory.

The factors which favored its early selection were the possibility to realize them with a relatively unsophisticated technology – the technology of post WWII France – and the combination natural uranium + on-line refueling allowed to use them to produce almost pure ²³⁹Pu for military applications without too much interference with their use as power reactors.

Conversely, the factors which led to their elimination was the low volumic power in their core which led to very large facility sizes when the unit power rating started to increase above a few hundred MWe, their sensitiveness to the ¹³⁵Xe poisoning which limited their flexibility… and their capability of producing weapon-grade plutonium, once proliferation became undesirable.

The AGR were designed by the British to overcome some of the weaknesses of the Magnox: the switch to slightly enriched uranium allowed for an oxide fuel, refractory, which in turn allowed for a factor two reduction in core volume, an increase in the gas exit temperature and an excellent thermal efficiency. Their success was limited by a rather troublesome startup, partly due to bad industrial organization, mostly due to corrosion of steel by the higher temperature CO₂. They operate very well today, but too late to save the species: in the meantime, LWR have won the race.

The case for gas cooling is not close, as we shall see when turning to future generations (HTR, GFR), but their first period is over.

4.2 Graphite moderated and boiling water cooled reactors RBMK

The “Big water channel reactor” RBMK was one of the two nuclear workhorses of the former Soviet Union, limited to Russia, Ukraine and Lithuania. Fuel bundles of low enriched uranium oxide are cooled by boiling water circulating in pressure tubes vertically inserted in a massive graphite pile.

Principle of a nuclear power plant with boiling water reactor

The initial factors of success of this species were identical to the precedent: accessible technology and dual purpose (electricity and weapon-grade plutonium). This latter quality restricted their use to the Soviet Union proper and only VVR were exported to the other countries of the then “Eastern Block”.

The reason for their progressive elimination has one name: Chernobyl (even though later improvements have significantly reduced their instability domain).

4.3 Heavy Water Reactors CANDU

CANDU (for CANadian Deuterium Uranium) is today the only species maintaining an active niche in a Light water dominated world. From a pure neutron physics point of view without cost considerations, heavy water is the best possible moderator. Using D₂O as both moderator and coolant, CANDU can be fueled with natural uranium oxide and reach significant burnups. The fuel bundles, on-line refueled, are cooled by pressurized heavy water circulating in horizontal pressure tubes. Heavy water must be periodically re-enriched and de-tritiated.

The Canadian exported CANDU in many countries (India, Pakistan, South Korea, Argentina, Romania and China) based on the following factors: accessible technology (pressure tubes are easier to manufacture than big pressure vessels), no dependence from a very limited number of uranium enrichment suppliers, and smaller sizes as they offer 300 and 600 MWe plants where most LWR are rated 1000 MWe and above.

On the negative side, specific investment is high and heavy water is very expensive, but fuel cycle costs are low. On-line refueling allows for high availability, but, together with natural uranium, it also makes it technically easy to produce weapon-grade plutonium.

4.4 Light Water Reactors PWR, BWR & VVR

In term of installed power, PWRs alone account for more than half the world nuclear capacity; together, the three LWR “cousins” cover more than 85% of the market. LWR really dominate the reactors biotope. In reality, this domination is even more absolute, as most of the reactors used for naval propulsion are small PWR (their thermal rating of the order of 100 MWth instead of 3000),

As ordinary water is the best to slow neutrons down, the cores are compact. On the other hand, water is absorbent and LWR must used a fuel with significant concentration in fissile isotopes, typically 4% ²³⁵U or 8% plutonium, refueling being off-line. Even with high pressure in the primary circuit, these reactors have a mediocre thermal efficiency (~35%) and a rather low conversion factor, around 0.6. But they are sturdy and more flexible than initially expected. Relatively large unit are, in most countries, quite competitive to generate baseload power [15-16], even without any credit for carbon emission.

In addition to the intrinsic qualities mentioned above, the key factors for this immense success were the technology transfer from submarines to power plants, the sheer power of the American industry in the western world in the 60s and 70s, and the driving force of a then huge nuclear power programme in the USA. Among a number of reasons behind the French switch from UNGG to the “American” species was: “because everybody else chose them” – even though we are expected to cultivate the French exception. “Vive la difference”, as the British use to say.

To complete the selection story, one should also mention High Temperature Gas-cooled Reactors HTR which almost made it as a full fledged species in the 70s, and Sodium-cooled Fast neutron Breeder Reactors doing the same in the 80s. Both had some very specific advantages which will probably lead to their “resurrection” ,as we shall see below, but in both cases, the attempt proved to be premature.

The LWR species will continue to dominate in the near future. With one exception all “Generation III” reactors are LWRs: the already ordered ABWR and EPR plants and projects like AP1000, ESBWR, VVR640, SVR100, APWR, etc. The only exception, the ACR 750 project, is no longer a pure CANDU, as it would be cooled by ordinary water and fueled by low enriched uranium…

5. Biotope, dominance and selection

In nature, the success of one species makes it very difficult for competing species to penetrate the same ecological niche. Without the massive extinction of the dinosaurs, would the mammals have thrived? Would one of their branches evolved into Man? The same applies in the reactors phylum: construction facilities are made to build LWRs, fuel cycle facilities are optimized for LWRs, nuclear R&D is devoted in majority to LWR improvements, and most Safety authorities around the world “think” LWR. I am not sure it is true that one NRC staff member once asked where was the emergency water injection system in gas-cooled Fort St Vrain, but the story is credible. I know for a fact that one of the heaviest constraints imposed on sodium-cooled Superphénix, the hypothesis of guillotine double break of the largest secondary piping, came only from some kind of PWR contamination.

One can reasonably ask if there is room for any other species than PWR and BWR. Both technologies are close enough to co-exist without problem, and both are different enough to respond to the desire for a minimum diversification which may explain today’s CANDU niche. Shouldn’t we simply go on improving these two species?

Let’s put it another way. No new candidate species will find a niche unless it exhibits a significant advantage in at least one of the domains where LWRs have an undisputed weakness. But the very notions of advantage and significant can vary with time! Witness the automobile:

In the beginning of the motor car technology, there was also a flourish of creativity, and the future dominance of the internal combustion engine over its electrical and steam driven competitors did not occur overnight. The first automobile to break the 100 km/h barrier was an electric car, the Jamais Contente of C. Jenatzy, in 1899, performance that we could equate with the first electricity production by the Fast Neutron reactor EBR1 in 1951. In 1906, the world speed record belonged to a steam car which reached 196 km/h! But a key factor established the success of the internal combustion engine: the unmatched autonomy offered by the gas tank. To push the comparison to its limits, one can remark that internal combustion engines exist in two varieties, gas and diesel, as close and as different as PWR and BWR. Today, the electric car survives on a niche (apart from its railroad avatar, the TGV). It was, however, as soon as 1900, obvious that the electric car was very superior to its competitors in terms of atmospheric pollution and noise. At the time, those undisputed advantages were not significant, but winds are changing nowadays. The environment which allowed for the dominance of the LWR species may also be evolving.

6. From Spontaneous Selection to a formalized Process [17-18]

It is precisely this kind of thinking which explains the two very interesting initiatives, launched just at the turn of the century. At any given moment, and considering objects whose lifetime (from design to dismantling) spans the century, the weight of the existing species hinders all attempts to make significant breakthroughs. Even the so-called “revolutionary” advanced LWR designs, which exhibit rather modest changes in the basic LWR technology, meet some diffidence from many regulators, because they are – factually – loosing part of the return of experience from their forerunners. Obviously, any breakthrough, any introduction of a brand new reactor species must be prepared decades in advance. With this kind of delay, one can hope to design not only “reactors”, but nuclear systems better suited to the selection criteria of the 2040s, which may not be identical to the criteria which led to the present selection.

Philosophically, this is a real change. Instead of designing reactors optimized for today’s market – as Generation IV, one tries to anticipate what the market will be four decades from now, to imagine the best possible concepts to answer these faraway demands and to launch today all the actions necessary, R&D and beyond, to make this desired future possible. Actually one tries to replace the past “natural” spontaneous selection by a formalized process.

6.1 GIF, the Generation IV International Forum.

At the initiative of the USDOE, since 1999, ten countries have worked together to select a few model concepts for future nuclear systems, and to define and perform the R&D necessary to make them ready for possible commercialization after 2030. Criteria for formal selection included Sustainability (fissile resources utilization, waste minimization, proliferation resistance and physical protection), Safety & Reliability (radio-protection, reactivity control, heat removal, mitigation features) and Economics. A first phase was open to the unbridled creativity which led to revisiting all former reactor designs and inventing a few more. The result was a list of roughly 120 concepts. Then, within the Generation IV International Forum, each concept was passed through the sieve, and six of them survived the ordeal. The six model concepts finally selected are:

• Supercritical Water Cooled Reactor System SCWR;

• Very High Temperature Reactor System VHTR;

• Sodium Cooled Fast Reactor System SFR;

• Lead Alloy Cooled Fast Reactor System LFR;

• Gas Cooled Fast Reactor System GFR;

• Molten Salt Reactor System MSR.

I shall not describe these concepts in detail, as many papers in this conference are devoted to them. But there are a few comments worth making:

All these systems do not have same timeframe for development. One could reinvent Superphénix – or, rather its successor design EFR – in little time. The VHTR and SCWR could be developed at the prototype level rather quickly. The GFR is farther away, and the MSR even farther (some GIF participants do not even include it).

The weight of the “sustainability” criteria appears in the fact that at least 4 and possibly 5 of these systems are based on closed fuel cycle to better use the fissile natural resources, 3 of them being fast breeders.

The VHTR and (later) the GFR target not only the generation of electric power but the co-generation of power and hydrogen with the aim to make transportation fuels from fission power. This is certainly necessary if we want nuclear power to contribute very significantly to the reduction of greenhouse gases emissions on a world scale.
Finally the future may not be limited to these 6 species. Some intriguing concepts are developed like the AHTR, a molten salt-cooled HTR. Some teams keep working on the Accelerator Driven subcritical systems, the niche of which could be the transmutation of minor actinides, if deemed useful at some point, etc.

6.2 INPRO, International Project on Innovative Nuclear reactors & Fuel Cycles.

In 2000, the IAEA initiated the INPRO Project in which fifteen (now eighteen) member states have worked to define "User Requirements" for innovative nuclear energy systems in the area of Economics, Sustainability and Environment, Safety, Waste Management, Proliferation Resistance and some cross-cutting issues. The time horizon of this exercise is 2050. They have also developed a methodology of assessment for such systems. Phase 1A of INPRO was completed in June 2003, and the methodology is being tested on a 6 “national cases”. Started entirely as an extrabudgetary initiative, INPRO is now partly funded by the Agency regular budget.

Based on similar analyses and motivations, the works of GIF and INPRO are not identical: GIF partners are mostly suppliers, and their work will steer the R&D, whereas INPRO expresses mostly the requirements of potential future users. Each group is quite aware of the other's results, and they have worked in cooperation on some issues (like proliferation resistance).

7. Fusion

For fusion, it is too early to see if the “natural history” approach is relevant. ITER, the big international facility about to be built, might not yet be the true equivalent of the December 1942 CP1 experiment which was our starting point… One can nevertheless remark that from a flourish of early configurations (Yin-Yang, stellarator, Z-pinch…) the Tokamak species dominates today fusion’s prehistory. I am referring only to Magnetic Confinement Fusion, because ICF does not seem to offer promising prospects for power generation.

Tokamak principle

8. Conclusion

From 0 TWh 50 years ago to some 2 600 today, more than the equivalent in primary energy of the oil production of Saudi Arabia or Russia, nuclear power has come a long way. This is where the “natural selection” has led us but this is not enough.

In the next 50 years, the most dramatic problem which we must address is probably the Energy/Climate Dilemma. One third of the 6 billion people with whom we share this planet Earth have not enough energy to lead a decent life, under any modern standard. Within fifty years, mankind will number 9 billion. Even under the most optimistic assumptions concerning increases in energy efficiency and “thrifty” development, primary energy demand will then reach at least the double of the present 10 billion tons of oil equivalent we consume every year.

On the other hand, it is scientifically established that, since the industrial revolution, we have managed to significantly affect the composition of our atmosphere, where the concentration in greenhouse effect gases (GHG) is today twice higher than the level the Earth has ever experienced since the dawn of Man. There is still some residual controversy about just how much of the global warming which occurred throughout the XXth century is due to this proven increase in GHG concentrations, but the best computer models run by the IPCC teams throughout the world agree: at least half of the warming was due to the increase in greenhouse effect. And what those models tell us about our XXIst century is far from reassuring. Any precautionary principle would require that we cut our GHG emission by half.

To complete the picture, 80% of the primary energy we use today comes from the fossil fuels, Oil, Coal and Gas, the combustion of which is the main source of GHG releases. This value of 80% takes into account the 10% coming from (non commercial) traditional biomass which remains the only source of energy for some 2 billion people today.

To face this tremendous challenge, there is no “magic bullet”, not even the nuclear bullet. We shall have to take all the measures we can take, and then some more…

1. We must address the demand side and not only the supply side of the equation. We must limit our energy consumption, increase our energy efficiency, and conserve energy. This applies first and foremost to our presently industrialized economies in the OECD, but the emerging giants, China, India, Brazil to name the biggest, must also find thrifty development paths, because of the sheer weight of their demography.

2. We shall have to “sequester” CO₂ whenever and wherever technically feasible. The development of sequestration is still in its infancy, and the long-term safety assessment of disposal sites will not be much easier than that of radwastes, but I do not believe we can do without it.

3. We must increase in our energy mix the share of non GHG-emitting sources, namely nuclear power, hydropower and other renewables.

It is my firm belief that to tackle such a problem, all those measures will be necessary. It would be dramatically unrealistic to hope to succeed without a significant increase in the contribution of nuclear power: for electricity generation, of course, but later for other uses like water desalination, process heat, hydrogen production…

Let us hope that the formalized selection process which the nuclear community is attempting presently will prove efficient, and allow nuclear power to meet our hopes.

REFERENCES

[1] Alvin M. Weinberg. The First Nuclear Era / The life and Times of a Technological Fixer. AIP Press 1994

[2] John W. Simpson. Nuclear Power from Underseas to Outer Space. ANS 1995

[3] Controlled Nuclear Chain Reaction: The First Fifty Years. ANS 1992

[4] Bertrand Goldschmidt . L'Aventure Atomique, Fayard 1962

[5] Bertrand Goldschmidt. Les Rivalités Atomiques 1939-1966 Fayard 1967

[6] Bertrand Goldschmidt. Le Complexe Atomique Fayard 1980

[7] Bertrand Goldschmidt. Pionniers de l'Atome. Stock 1987

[8] Jacques Leclercq. L'Ere Nucléaire. Hachette 1986

[9] L'Aventure de l'Atome. Flammarion 1992

[10] Repères chronologiques de l'histoire du nucléaire 1896-1995. CEA 1998

[14] ELECNUC – Les centrales nucléaires dans le monde, CEA/DES/SEE 2002

[15] Les coûts de référence de la production électrique. DGEMP France 2003 (www.industrie.gouv.fr)

[16] S. Rissanen, R. Tarjanne, University of Lapaarenta, Finland 2004

[17] INPRO, IAEA Tecdoc 1362. 2003

[18] The Roadmap to Generation IV. GIF 2003

© European Nuclear Society, 2004