Direct cooling
 scroll 
Cooling of the turbine condenser in a power plant with
non-recirculated river water. Direct cooling with fresh water is the
cheapest cooling method regarding the required investment when sufficient
river water is available. To avoid too high a thermal load of the river
water, maximum values for the inlet temperature of the heated water
(e.g. 30 °C), for the heating of the entire river water following
mixing (25 °C or 28 °C) and the heating margin (3 °C) were
fixed. As a result of the preload, a further thermal load is impossible
for many rivers in Germany. Therefore, closed-circuit cooling is increasingly
used.
back
|
|
11 - 15 March 2018
Munich, Germany
30 September - 04 October 2018
Prague, Czech Republic |
